- Access the SMS Command Center™ platform.
- Click on the "Send SMS" option to begin the process.
- Fill in the recipient list, applying any necessary filters.
- Choose whether to use a template or compose a custom message.
- Instead of sending all messages at once, enable DRIP mode for a controlled sending process.
- In the "Action" field, specify a tracking label or message identifier (e.g., "In Stock Promotion - Scar 17").
- Set the start time for sending the messages. For example, if today is Tuesday, set it for tomorrow at 8:00 AM.
- Determine the batch quantity, which determines the number of messages sent simultaneously. It's recommended to start with a smaller number (e.g., 10-20).
- Specify a pause duration between batches. For instance, set it to 2 minutes to allow for a smooth sending process.
- Determine the time interval between each batch by setting the "Repeat After" value. It can be adjusted based on your preference and requirements.
- Consider adding a slight delay to ensure message delivery stability.
- Optionally, set the process to operate within specific hours. For example, limit it from 8:00 AM to 5:00 PM.
- Verify that the DRIP mode configuration is in line with your preferences.
- Click on "Send SMS" to initiate the drip mode sending process.
- Sit back and let the platform send out the messages gradually according to the configured settings.
- For further assistance or clarification, reach out to the support team for personal guidance.
By following this step-by-step guide, you can effectively use DRIP mode in SMS messaging without encountering issues related to excessive message sending.